Soldering relay socket for 310 series relays, pins pattern 02 (non latching, half can), standard type, mounting style 02 (2 fixing holes)

S210-A4A4 (5935 99 4049112). Sealed relay Socket for 315 series relays, pins pattern 01 (non latching), MIL C 39029, mounting style 22

Relay socket for 326 series, sealed, pins pattern 01 (direct current non latching), mounting style 03, on panel mounting (removable stud)

Relay base for 328 series relays, non latching, pins pattern for a DC relay, MIL C 39029, 01 panel mount, with 12/12 contact and 16/16 contact

Relay T 26

Relay E325123A

Relay double 28Vdc, 30V; 200mA; side mounted, straight pins, hermetically sealed, protected against short circuits

Relay

JR series miniature 5amp relay, 26Vdc nominal current, half can with 2 fixings, tin solder hooks

Relay

Railway relay

Railway relay

PHL relay, 50 Amps, 12Vdc, mounting style G

PHL relay, 50 Amps, 12 Vdc, Mounting style L

Relay

Red LED, shot body wires, IP 67 panel sealed.

Relay Manufacturer's reference E0218 UUX 003A

Relay REC 08D 3002 CB

Relay

RTD 3F 1002 C8E R023 Time delay relay

Relay RTE 3F 1500 C2E R023

Soldering socket, for 310 relay, pins pattern 01 (non latching), standard type, mounting style 04

S310 S 01 A 07 Relay socket

Relay socket

Relay socket

Sealed relay socket, pins pattern 01 for DC, on panel mounting with removable stud

Relay Socket for 316 series relays, sealed, Pins pattern 01 (DC non latching)

Relay base

Sealed socket for 318 relays, non-latching pin pattern 01, type MIL C 39029, under panel mounting fixed stud UNC

Relay socket

Relay socket for 318 series relay, sealed, pins pattern 03, mounting style 03

Sealed socket for 324 series, pins pattern 01 (non latching), MIL C 39029, on panel mounting, without contacts

Sealed socket for 324 type relays

Relay Base

Relay socket

STPI relay base Equivalent to S402D2B3

Crimp contacts sealed socket, for 326 series relay, MIL C 39029

Socket S402D2B3

Faston lug socket for 326 type relays as per NF F 62 002, 01 pin pattern, 2 mounting holes

Faston lug socket for 326 relays, pin pattern 01, XYY keying

Faston lug socket for 326 type relays as per NF F 62 002, 09 pin pattern, 2 mounting holes

326 series relay socket, non sealed, pins pattern 01, type A, mounting style 09 (3 fixing holes), without contacts

326 Series relay socket, non latching, on panel mounting, without contacts

Crimp contact non-sealed socket, pin pattern 01, type A, mounting style 18, terminal type 22

Sealed socket, MIL C 39029, fixed stud mounting, without contacts

Sealed socket, MIL C 39029, fixed stud mounting, with contacts

Sealed socket for 328 relay, pins pattern 01 (DC current, non latching), MIL C 39029, mounting style 03

Sealed socket, pins pattern 01, DC non latch, MILC39029, mounting style 04 (on panel mounting, removeable stud)

Sealed socket for 328 series relay, pins pattern 01, MIL C 39029, mounting style 06 (under panel mounting, fixed stud)

Sealed socket, MIL C 39029

Sealed relay socket for 328 series relays, pins pattern 02 (latching), type A (MIL C 39029)

Sealed relay socket, pins pattern 2 (for AC relays), on panel mounting.

Sealed Socket for series 336 relays, pin pattern 01 (DC), MIL C 39029, mounting style 06

Relay Base

Relay Socket

Faston lug socket for 336 type relays, 04 pin pattern

Solder type socket for 336 relays, pin pattern 01non-latching, mounting style 27 PCB mount, terminal type 2 gold plated

Solder type socket for 336 relays, pin pattern 01non-latching, mounting style 27 PCB mount, terminal type 3 tin plated

Solder type socket for 336 relays, pin pattern 01non-latching, mounting style 27 PCB mount, terminal type 4 tin plated

Socket

Socket

REL Socket

SME 210 B 3 K 2 Mil spec socket

Socket

Socket

Socket, provided with pins

Socket , pins not provided

SME 410 B 3 K 2 Mil spec socket

Socket

Socket

Socket

Relay

HDS10DE1 Relay, non latching, 28Vdc, 1 Amp, 2 pole double throw

Relay CECC 16-101-015-03-04

Ultraminiature non latching relay 2 pole double throw, coil code 12, 12Vdc, low level test, alternative to ER412-12A/G

Relay **PLEASE NOTE: This relay is not MIL qualified but manufactured according to the MIL Spec M39016/15-105L as advised by supplier**

Relay M39016/9-062M

Relay HDS10DJ1

Relay, equivalent to HDS10D-H1

TD3 Timer relay, 2 fixing holes, 28Vdc

TE10F Timer Relay

Timer delay relay

Timer delay relay

Timer delay relay

Relay

Relay

Relay series T05, non latching ,transistor size, with coil transient suppression device, coil code 6, 2 pole DT, 1amp, F21 tested in accordance with M,P & R level of MIl R 30916

2 pole 1A relay **Please note: this part comes complete with mounting gasket**

Ultraminiature T05 transistor size non latching relay 2 pole double throw, 28V / 1A, type T, with coil transient suppression device, coil code 30, header terminal style P (leads 4.75mm length), F82 option denotes the relay is qualified to CE. CECC 16-101-015-02-28

Series T ultraminiature non latching relay, 2 pole double throw, 28V, 1A *This part is not MIL qualified but manufactured according to the MIL Spec M30916-20 010P & tested in accordance with M, P & R level of MILR30916*

Hermetically sealed non latching relay, 2 pole DT, 5 amp, 28 Vdc, gold plated terminals, with protection, straight half can

Lead free version of: 315200EP28V Hermetically sealed non latching relay, 2 pole DT, 5 amp, 28 Vdc.

Hermetically sealed non latching relay, 4 pole double throw, 5 Amp, 28 Vdc, straight full can with A type mounting, gold plated straight pins with protection

Lead free version of: 325400EP28VDC Hemetically sealed non latching relay, 4 pole double throw, 5 amp, 28 Vdc.

326F403D110Vdc, 4 pole 10 amp non-latching hermetically sealed relay, gold plated terminals

Socket *MOQ 5 pieces*

Series 259BAC bistable magnetic relay, 3 PDT

110VDC Timer Relay

S326 P 15A 18 00 Crimp contacts non-sealed socket

S336 P 05 A 18 00 Crimp contacts non-sealed socket

Contact

Non Latching relay, XPole DT, X Amp, XX Volts XX, (X) sensitive, straight half can with X type mounting , X plated straight pins.

Non Latching relay, 2 Pole DT, 2 Amp, 24 Volts DC, straight half can with A type mounting, Gold plated straight pins special

RELAY 2A DPDT CECC16101.021.01.09.05.12

Hermetic Relay 2 Pole Double Throw, 2 Amp

Hermetic Relay 2 Pole Double Throw, 2 Amp CECC 16101021 02050311

Non Latching Relay STPI part no. 0311604728VCC

Non Latching relay, 2 Pole DT, 2 Amp, 28 Volts DC, straight half can with 2 fixing holes, Tin plated hooks. Suppressed.

Hermetic Relay 2 Pole Double Throw, 5 Amp

Non Latching relay, 2 Pole DT, 5 Amp, 28 Volts DC, straight half can with E type side mounting with 2 fixing holes, angled pins

Relay 28V, old CECC ref 16101-018-2-P03, new CECC ref 163 03801 G1C0

Non Latching relay, double pole double throw, 10 Amps, 28Vdc, straight half can with 2 fixing holes, hooked pins SPEC CH II PROT

Hermetic Relay 2 Pole Double Throw, 10 Amp

Non latching relay, 2PDT, 15 amp, 28 vdc, protected

RELAY 25A SPDT SPEC CH II PROT

Relay 326/245 adaptor flat lug with fin with STPI relay 326 4 RT 110V

Railway relay.

Non Latching relay, 3 Pole DT, 9.1 Inductive Amp, 24 Volts DC, straight full can, straight special pins BR 015/9296 Polarised Coil, please check + on terminal 10 Issue C

Relay 25A 28V 3PDT

Relay 3 pole double throw 25 Amps, 115Vac / 400Hz 0328 6017

Hermetic Relay 3 Pole Double Throw, 25 Amp

Railway relay. 3NO, 3NF, 6PDT, 24Vdc .

0336604855VdcZZZY, relay

Relay 230 282 127V 50/60Hz

235 33 127V 50/60Hz instantaneous relay 3 pole double throw, 127v50/60Hz, Hermetically sealed, plug in.

Hermetically sealed 30vcc Relay

Relay series 235, 3 RT, 5 Amps, 220Vdc, hermetically sealed

Relay 240 035 0.275A 50/60Hz

Hermetically sealed instantaneous relay, 4 pole double throw, 5 Amp, 24Vdc, full can with straight pins

Series 245 4 pole double throw standard relay 5 Amps

Relay

Instantaneous relay, series 245, 4 Pole double throw, 3 Amps, standard version, 110Vdc

Instantaneous relay, 4 RT, 4 pole double throw, protection against overvoltages for dc relays, by a diode wired in parallel with the coil and built in the relays case. 24V, 50hz, socket type 9743A *MOQ 5 pcs*

245 TCR, time delay relay, T2 tropicalized, 110/127Vdc, 0.6 +/- 50%

Auxiliary relay, hermetically sealed under Nitrogen, 250 VAC, 48 VDC, 1920 Ohm, coil resistance, 14 pins

245 43 110V 50hZ Instantaneous relay series 245, 4 pole double throw, 3 Amps, hermetically sealed, 110V 50 Hz

Series 245 4 pole double throw instantaneous relay, hermetically sealed, rear connections, 24Vdc

Instantaneous 3 amp relay 60Vdc

Compact industrial instantaneous 3 amp relay, 4 pole double throw, standard version, 220Vac 50Hz, protected

Compact industrial instantaneous 3amp relay, 4 pole double throw, standard version

Instantaneous 4 pole double throw relay, 3A

245 481 110Vac 50 or 60Hz relay

Relay 24Vdc 245 481 RS

245 TCR-4 220VAC Relay

Relay T2-4 220 Vdc

Electronic time delay relay on operate & on release, 3 Amp, 48V

Electronic time delay relay on operate, 2 pole double throw delayed + 1 pole double throw instantaneous, nominal voltage 220, **Time delay 40_200 seconds** 259 219 TEEI R2

Relay 24Vdc REP 3 (4-20sec time range)

Instantaneous plug in relay 220V 50Hz, 4 pole double throw

Relay 110V 50Hz

Relay 30Vdc

Relay 259 432 TEEI 110/127V rep 4 (15-50 seconds time range)

Instantaneous relay, 4 pole double throw, plug in, rear connections socket, with magnetic blow out (option 7 - addition of a permanent magnet on each contact assembly), 48Vdc

259 139 CPIE Relay, 48Vdc rep 4

259 155 100V 60HZ Relay

Relay 259 171 220Vdc

Electronic time delay relay on operate, 2 pole double throw delayed + 1 pole double throw instantaneous, nominal voltage 110, **Time delay 0.25-1.5 seconds** 259 219 TEEI T2 110/127V REP1

Electronic time delay relay on operate rep 2 (1-5 seconds time delay), 48Vdc. 259 219 TEEI T2

Relay 259 219 TEEI T2 48Vac 50hZ rep 2 (1-5 seconds time delay)

Relay electronic delay relay on release, 2 PDT & 1 PDT instantaneous, rep 2 time delay 1-5seconds, 48Vdc,

259 219 TERI T2 250VAC rep 5 time delay relay, 250 VAC, 40-200 seconds time delay

Relay 259 39 BIMAC 48Vdc

Instantaneous relay, 4 pole double throw, hermetically sealed, 110 vdc 259 43 110VDC

259 43 240VAC 50Hz relay

Relay 48Vdc

Relay

Electronic time delay relay on operate 259 432 TEEI 4-20 Second 110/127 Vdc Rep 3

Electronic time delay relay on operate 259 432 TEEI 110/127V Rep 4 (15 to 50s time delay)

259 Series electronic time delay relay on operate, 2 PDT delayed + 1 PDT instantaneous, delay range REP 3 4-20 seconds, 24Vdc

259 432 TEEI 48Vdc rep 4 Electronic time delay relay on operate, 5 Amps, 48Vdc, rep 4 (15 to 50 seconds time delay)

Electronic time delay relay, 5 Amps, rep 3 (time delay 4-20 seconds), 48Vdc 259 432 TEEI 48Vdc/CA Rep 3

Relay 259 433 TERI T2 24Vdc, rep 3 (4-20s)

Relay 259 433 TERI 110/127V rep 5 40-200s

259 439 SD10 Relay 24Vdc

4 PDT, Instantaneous Relay, 10 AMP,120/127 alternating current , 60Hz, EX.11 temp max +50oC with bobine impregnee, plug in relay

Relay 4PDT 259 49 220V 50hZ

Instantaneous relay 4 PDT, 48Vdc

Instantaneous relay, 4 PDT, magnetic blowout, 220Vcc

259 49 110Vdc relay, replaces 259 48/7

Instantaneous plug in relay, series 259, 4 pole double throw, 125Vdc, magnetic blowout option

Relay 259 497 110Vdc

Instantaneous relay 4 pole double throw 48Vdc with red drop signal visible on front panel when the relay picks up. 259 49/9 48Vdc

Series 259 Relay, 4 pole double throw, red drop signal visible on front panel when the relay picks up (option 9), 110 Volts, 60 hZ 259 49/9 110V 60hZ

Instantaneous relay, 4 pole double throw, 24 Vdc, tropicalized, with core impregnated coil

261-406-1-04A Relay. 1600-2128

Relay 261 A 406 0.35ACA

Relay 261 A 406 0,52 ACA

280 58 BIMAC Relay 48Vcc

280 58 BIMAC Relay 220Vdc

Instantaneous relay, 6 PDT, 24Vdc

Contact wire section 0.3 to 0.6mm2

Crimp tool

Crimping tool

Contact wire section 0.8 to 2mm2

Pins for socket 9851

SILICON GASKET. USED ON 320 400 26.5VDC

Silicon gasket for 328 relays 284345, 284 345

Test relay with flying leads, 316 series variant 2 pole, for EE702-02

Extraction tool for # 16/16 contacts part number 284 176

Gasket 284 140

Contact size 16/20

Contact # 16/16

SIZE 12/16 CONTACTS

Contact size 16/16, gold plated

Contact #16/20 type II

Contact pin 0.65 to 1.65mm2

Insert / extract tool

Relay 24Vdc

Relay 72Vdc

SIZE 20/20 CONTACTS

Isolant silicone 318

24V block router

284 352 24V Relay clip block 24Vdc, Bi directional

Isolante 320

284 398 Rubber gasket

Test plug relay 315 203 direct current with flying leads

Test plug relay 316 203 direct current with flying leads

Test plug relay 326 403 direct current with flying leads

Test plug relay 326 403 alternating current with flying leads

Test plug relay S301-B1B0

Relay, designation ASNE0242A28A0

Relay 2 pole double throw, 3 Amps, vertical side mount with 2 fixing holes, gold plated straight pins, 28Vdc

Hermetically sealed non latching relay 2 pole double throw, half can with 2 flange mount fixing plates, tin plated terminals, 26.5Vdc, 700 Ohms. CECC16101-008-10-03-02

Hermetically sealed non latching relay 2 pole double throw, half can with 2 flange mount fixing plates, tin plated terminals, 48Vdc, 2300 Ohms. CECC16101-008-13-03-03

305 100E 26.5V 10mW Non Latching relay, 1 Pole DT, 2 Amp, 26.5 Volts DC, straight half can with A type mounting, Tin plated straight pins 1 pole with 10mW ****NOT CECC RELEASE****

4 PDT, Instantaneous Relay, 3 AMP, 110 alternating current , 60Hz, plug in relay, case protection IP50. These are not filled with dry nitrogen. These relays are equivalent on the electrical parameters as the 245-482 and are sold in the same conditions.

Non Latching relay,2 Pole DT,2 Amp,12 Volts DC, plain half can with A type mounting ,(H) =ETin plated straight pins.

Non Latching relay,2 Pole DT,2 Amp, 26.5 Volts DC plain half can with A type mounting,(H)=E Tin plated straight pins. CECC16101.014.19.01.02. YA14-3F26V5

Non Latching relay, 2 Pole double throw, 2 Amp, 28 Volts DC, straight half can with A type mounting (H) = E Tin plated straight pins. CECC 16101-014-21-01-02

Non latching relay, 2 pole double throw, 2 Amp, plain half can, gold plated pins, sensitive, 26.5Vdc, including PAD

Non Latching relay,2 Pole DT,2 Amp,12 Volts DC,(W) sensitive, plain half can with tin plated (E) straight pins.

Hermetically sealed non latching relay, 2 pole DT, 2 amp, 28 Vdc, straight half can with B type mounting with 2 holes & screw fixing, (H) = E Tin plated straight pins.

Non Latching relay, 2 Pole DT, 2 Amp, 12 Volts DC, , straight half can with D type mounting with 2 holes, (H) = E Tin plated straight pins. CECC16101.014.13.03.02.

Relay 310238GB12VCC210R CECC16101.021.02.05.03.11

Non Latching relay,2 Pole DT,2 Amp,26.5 Volts DC, straight half can with C type mounting with 2 hole fixings, H)=E Tin plated hooks. CECC16101.014.19.04.02

Hermetically sealed non-latching sensitive 2A relay, 2 pole double throw, half can with 2 vertical flange fixings, tin plated terminals, nominal voltage 12 Vdc with protection

Hermetically sealed latching bistable relay, 2 Pole DT, 2 Amp, 28Volts DC, straight half can with E type mounting ,with 2 hole fixings, Tin plated hooks.

Hermetically sealed latching relay, 2 pole double throw, 2 amp,12 volts DC, half can with C type mounting with 2 fixing holes, tin plated straight pins 310B250E12VDC D25 **New screening Level D25 additional screening consists of 5 minutes sinus vibration from 75 to 2000Hz/30G in the ambient temperature** ****These relays are RoHS exempt due to use of lead in solder. The termination is tin plated pins****.

Non Latching relay,2 Pole DT,2 Amp, 12 Volts DC, plain half can, tin plated straight pins, alternative to HFW5A-12-01-G00.

Non Latching relay,2 Pole DT,2 Amp,28 Volts DC, plain half can, tin plated straight pins. CECC16101-014-20-01-02

Non latching relay, 2 pole DT, 2 amp, 26.5 Vdc, straight half can with no fixings , with protection, tin plated straight pins. Equivalent to 311 200 EP 26.5Vdc

Hermetically sealed non latching relay, 2 pole DT, 2 amp, 28Vdc, with protection, plain half can with straight pins. The can on this relay is higher than normal due to the protection. **Manf part number 03116051**

Non Latching relay,2 Pole DT,2 Amp,28 Volts DC with B type mounting brackets with 2 holes & fixing screws, tin plated straight pins with protection ****NOT CECC RELEASE****

Hermetically sealed non latching 2A relay, double pole, double throw, nominal voltage 26.5Vac, half can with 2 fixings holes flange mounted, tin plated solder hook terminals

Hermetically sealed non latching 2A relay, double pole, double throw, nominal voltage 28Vdc, half can with 2 fixings holes flange mounted, tin plated hooks

311 238 26.5Vdc Hermetically sealed non-latching relay, 2 amp, 2 pole double throw, half can side fixing with 2 fixing holes, tin plated hooks, 26.5 Vdc

Relay Non latch 2 RT 2 Amp

Hermetically sealed non-latching relay,1 pole DT,10 amp,28 vdc,straight half can, no fixing holes, tin plated straight pins

Hermetically sealed non-latching relay,1 pole DT,10 amp,28 vdc,straight half can flange mount with 2 fixing holes, tin plated straight pins with Protection

Hermetically sealed non-latching 10amp relay, single pole double throw, half can, side mount 2 fixing holes, tin plated terminals, 12Vdc with protection.

Relay Non Latch,1 Pole DT,10 Amp,28 Volts DC, straight half can with D type mounting, Tin plated with protection straight pins.

Hermetically sealed non latching relay, 2 pole DT, 5 amp, 28 Vdc, straight half can with B type mounting with 2 fixing holes & screws, tin plated straight pins

Non Latching Relay,2 Pole DT,5 AMP,28 volts DC, Half can type B mounting bracket with 2 fixings holes and screws, Tin plated straight pins, with PROTECTION.CECC16303803 G1D2 EEO. ****NOT CECC RELEASE****

Non latching relay, 2 pole double throw, 5 amp, 28 Vdc, half can, type D mounting bracket with 2 fixings holes, tin plated straight pins, with protection. CECC16303 803 G1 B2

Hermetically sealed non latching relay, 2 RT, DPDT, 5 amps, half can, 2 fixing holes, tin plated hooks, 12Vdc

Hermetically sealed non latching relay, 2 pole DT, 5 Amp, 28 volts DC, half can type D mounting bracket with 2 fixings holes, tin plated hooks, with protection. CECC16 303 803 G2 B2

Non Latching Relay,2 Pole DT,5 AMP,28 volts DC, Half can type E side mounting bracket with 2 fixings holes, Tin plated hooks

Non Latching Relay,2 Pole DT,10 Amp,115 Volts AC,Half can, A type mounting, Tin plated straight pins

Non Latching relay,2 Pole DT,10 Amp,28 Volts DC, straight half can with A type mounting, Tin plated straight pins.CECC16303801G1A0 (formerly CECC16101.018.2A03)

Non Latching relay,2 Pole DT,10 Amp,28 Volts DC, straight half can with B type mounting with 2 fixing holes & screws. Gold plated straight pins. CECC16303 801 G3 D0 (Old CECC Ref: CECC16101.018.3D.03).

Non Latching relay,2 Pole DT,10 Amp,28 Volts DC, straight half can with B type mounting with 2 fixing holes & screws. Gold plated straight pins, with Protection.CECC.16303 801 G3 D2

Non Latching relay,2 Pole DT,10 Amp,28 Volts DC, straight half can with D type mounting with 2 hole fixings, Gold plated straight pins. CECC16303.801.G3.B0(formerly CECC16101.018.3E.03)

Non Latching relay, 2 Pole DT, 10 Amp, 28 Volts DC, straight half can with D type mounting with 2 hole fixings, Gold plated straight pins CECC16101.018.3E.23.

Non Latching relay,2 Pole DT,10 Amp,28 Volts DC, half can with tin plated straight pins D type with 2 fixing holes.

Hermetically sealed non Latching relay,2 Pole DT,10 Amp,115 Volts AC50/60Hz,straight half can with D type mounting with 2 fixing holes, Tin plated straight pins

Hermetically sealed 10amp non-latching relay, double pole, double throw, half can with side flanged mount with 2 fixing holes, tin plated terminals, nominal voltage 12Vdc

316 203 RTE A2F 1000 28Vdc Timer relay

316 203 RTE A2F 2001 28Vdc Timer relay

316 203 RTE A2F 4001 28Vdc Timer relay

316230115Vac50/400Hz non-latching relay, 2 Pole double throw, 10 amp,115 volts AC, 50/400Hz, straight half can type D mounting with 2 fixing holes, tin plated hooks, CECC16 303 801 X2B0

316230E115Vac 50/60Hz, Hermetically sealed non latching relay, 10 amp, 2 pole double throw, 115 Vac, 50/60HZ, straight half can, type D mounting with 2 fixing holes, tin plated hooks

Non Latching relay,2 Pole DT,10 Amp,12 Volts DC, straight half can with D type mounting with 2 fixing holes, Tin plated hooks

Non Latching relay,2 Pole DT,10 Amp,28 Volts DC, straight half can with D type mounting with 2 hole fixings, tin plated hooks.

Hermetically sealed non latching relay, double pole double throw, 6 Vdc, half can with 2 fixing holes, tin plated hooks

Non latching relay,2 Pole DT,10 AMP,28 Volts DC, half can with 2 fixings holes. Tin Plated hook . With protection (suppressed device for DC relays) CECC16303 801 G2C2 EEO

316248 115Vac 50/400HZ Hermetically sealed non latching relay, 2 pole DT, 10 amp, 115Vac 50/400HZ, straight half can with E type mounting with 2 side hole fixings, tin plated angled pins.

Non Latching relay, 2 Pole DT, 10 Amp, 28 Volts DC, straight half can with E type mounting with 2 side hole fixings, Tin plated angled pins. CECC16101-018-6P-03

Non Latching relay, 2 Pole DT, 10 Amp, 28 Volts DC, straight half can with E type mounting with 2 side hole fixings, Tin plated angled pins, with protection. MIL qualified M83536/9-027M

Relay, 115V 50/60Hz

Relay 10A, Half can with 2 fixing holes, gold plated pins, 72Vdc. 316 F 101 D 72 Vdc

Relay 316F 106 B44 110VCcc

Non Latching Relay,2 pole double throw,15 Amp,28 volts DC, half can with type B mounting brackets with 2 fixings holes & screws, gold plated straight pins ,with protection

Non Latching Relay,2 pole double throw,15 Amp,28 volts DC, half can with type B mounting brackets with 2 fixings holes & screws, tin plated straight pins with protection. *NOT CECC RELEASE*

Non Latching Relay, 2 Pole DT, 15 Amp, 28 Volts DC, Half can with type D mounting brackets, Tin plated hooks

Hermetically sealed non latching relay, 2 pole DT, 15 amp, 28 Vdc, half can type D mounting bracket with 2 fixings holes, tin plated hooks, with protection.

Non Latching Relay,2 pole double throw,15 Amp,28 volts DC, half can with type E side mounting brackets, tin plated hooks, with protection CECC ref: 16101.034.1P23

317248 115Vac 50-400HZ Hermetically sealed non-latching relay, 2 pole DT, 15 amps, 115Vac 50/400HZ, straight half can with E type mounting with 2 side hole fixings, tin plated angled pins.

Non Latching relay,1 pole double throw,25 Amp,28 volts DC, straight half can with B type mounting with 2 fixing holes & screws, gold plated straight pins, with protection. *NOT CECC RELEASE*

Non latching relay,1 pole double throw,25 Amp,28 Vdc,straight half can with B type mounting with 2 fixing holes & screws, tin plated straight pins, with protection

Non Latching relay, 1 pole double throw,25 Amp,28 volts DC, straight half can with C type mounting with 2 UNC fixing holes & screws, gold plated pins, with protection. CECC16303809 G3X2 EEO

Non Latching relay, 1 pole double throw, 25 Amp, 28 volts DC, straight half can with D type mounting with 2 hole fixings, gold plated straight pins, with protection.

Non Latching relay,1 pole double throw, 25 Amp, 28 volts DC, straight half can with D type mounting with 2 fixing holes, tin plated pins. CECC 16303809 G1B0 EE0

Non Latching relay,1 pole double throw,25 Amp, 28 Volts DC, straight half can with D type mounting with 2 fixing holes, tin plated hooks. CECC16303-809-G2-BO

Non Latching relay,1 pole double throw, 25 Amp, 28 Volts DC, straight half can with D type mounting with 2 fixing holes, tin plated hooks, with protection CECC16303-809-G2-BO

Non Latching relay,1 pole double throw,25 Amp,28 volts DC, straight half can with E type mounting with 2 side fixing holes, tin plated hooks, with protection.

Hermetically sealed latching relay, 1 Pole DT, 25 Amp, 28 Volts DC, straight half can with A type mounting, Gold plated straight pins. With Option P Protection

Hermetically sealed non latching relay 4 Pole double throw, 2 Amps, straight full can, tin plated pins, 12Vdc

Hermetically sealed non latching relay 4 pole double throw, 2 Amps, straight can with straight pins, tin plated. 26.5Vdc

Non latching relay,4 pole double throw,2 Amp,6 volts DC, full can with type A ,tin plated straight pins.

Non Latching relay, 4 Pole DT, 2 Amp, 12 Volts DC, straight can , tin plated straight pins, with protection.

Hermetically sealed non latching relay, 4 pole double throw, 2 Amps, straight can with tin plated hooks, 26.5Vdc

Non Latching relay,4 pole double throw,2 Amp,28 volts DC, straight full can with D type mounting with 4 fixing holes, tin plated hooks. CECC16101-033-1F04

Non Latching relay,4 pole double throw, 2 Amp,28 volts DC with B type mounting brackets with 4 holes, tin plated straight pins with protection. *NOT CECC RELEASE*

Hermetically sealed non latching relay, 3 pole DT, 10 amp, 28 Vdc, full can with E type mounting with 3 fixing holes , gold plated straight pins with protection.

Hermetically sealed non latching relay, 3 pole double throw, 10 Amp, 3 fixing holes, tin plated hooks, 28Vdc

Hermetically sealed non latching relay, 4 pole double throw, 5 Amp,28 Vdc, straight full can with A type mounting, tin plated straight pins with protection. CECC16303804G1A2EEO

325 400 EP 28Vdc D20 Hermetically sealed non latching relay, 4 pole double throw, 5 Amp,28 Vdc, straight full can with A type mounting, tin plated straight pins with protection & extra screening D20

Non Latching relay,4 pole double throw,5 Amp,28 volts DC, straight full can with B type mounting with 3 M 2.5 fixing holes & screws, gold plated straight pins